Rockford Fosgate PM600X4 amplificatore a quattro canali serie Punch, versatile e indicato per alimentare qualsiasi configurazione del sistema audio
Oltre alla modalità stereo a 4 canali, è possibile collegare entrambi i canali per creare un amplificatore a 2 canali ad alta potenza o far funzionare altoparlanti stereo nella parte anteriore con subwoofer nella parte posteriore in modalità a 3 canali. I crossover HP / LP variabile e l'EQ Punch integrato consentono un'accurata regolazione delle frequenze dei bassi e le prese Pass-Thru RCA forniscono flessibilità con la crescita del sistema riducendo al minimo gli adattatori a Y.
Input Sensitivity 150 mV – 12 V
Recommended Fuse (not included) 100 A
Average Current Draw (13.8V Music) 45 A
Efficiency (average) 68% @ 4-Ohm
Dynamic Power (PVC/PowerCube®):
– 129 Watts x 4 @ 4-Ohms 0° Res
– 211 Watts x 4 @ 2-Ohms 0° Res
CEA-2006 Compliant
CEA-2006 Power Rating 75W x 4 @ 4? ≤1.0% THD+N
Shipping Weight 12.8 Lbs. (5.80 Kg.)
Suggested Alternator 75 A
Crossover Controls:
– Front/Rear High-Pass (HP): 50Hz-250Hz @ 12dB/octave Butterworth
– Front/Rear Low-Pass (HP): 50Hz-250Hz 12dB/octave Butterworth
– All-Pass: Yes
Number of Channels 4
Operating Voltage 9 – 16 VDC
Max. Current Draw (13.8V Sinewave) 90 A
Total Harmonic Distortion (THD+Noise) 4-Ohm: <1.0% / 2-Ohm: <1.0%
Rated Power (RMS Continuous Power):
– 75 Watts x 4 @ 4-Ohm
– 150 Watts x 4 @ 2-Ohm
– 300 Watts x 2 @ 4-Ohm Bridged
Total Power (Sum of Rated Power) 600 Watts
Bridgeable
Tone Controls:
– Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
– Front Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
– Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
– Rear Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
– Function depends upon LP/AP/HP switch position
Signal Input Hi/Low level: 2 RCA pair
Signal Output Low level: 1 RCA pair
Power Input Connector Captive C-Clamp
Power Wire Gauge 4 AWG
Speaker Output Connector Captive C-Clamp
Speaker Wire Gauge 8 AWG to 18 AWG
Heat Sink Type Cast aluminum
Cooling Convection
Optional Punch Remote Level Control (PLC2)
Visual Indicators:
– Power/Protect/Thermal LED
– Input Clip LED3
– Output Clip LED1,2,3
LED Color Legend:
– 1BLUE: <0.5% THD
– 2VIOLET: 1% THD
– 3RED: 10%+ THD
Circuit Topology Class Class A/B
Frequency Response 20Hz to 20kHz +/- 1.0dB
Dimensions (H x W x D) 6.05 x 19.71 x 33.73 (cm)
